Professional Mold Remediation and Removal Services by The Mack Group, LLC
| Nationwide Mold Remediation Removal Contractor Services |
The MACK Group, LLC provides mold remediation and cleanup contracting services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
|
Mold Remediation Means and Methods
A variety of mold cleanup methods are available for remediating damage to building materials and furnishings caused by moisture control problems and mold growth. This may include:
- Wet Vacuum
- Damp Wipe
- HEPA Vacuum
- Interior Demolition - Building materials and furnishings that are contaminated with mold growth and are not salvageable should be double-bagged using 6-mil polyethylene sheeting. These materials can then usually be discarded as ordinary construction waste. It is important to package mold-contaminated materials in sealed bags before removal from the containment area to minimize the dispersion of mold spores throughout the building. Large items that have heavy mold growth should be covered with polyethylene sheeting and sealed with duct tape before they are removed from the containment area.
The MACK Group, LLC selects remediation personnel who have the experience and training needed to implement the remediation plan and use Personal Protection Equipment and containment as appropriate.
For more information visit our website at www.mackgrp.com/mold_remediation_cont ractors.html
Mold Remediation, Mold Removal and Cleaning Contractor Services
Mold Remediation Basics
- The purpose of mold remediation is to remove the mold to prevent human exposure and damage to building materials and furnishings.
- It is necessary to clean up mold contamination, not just to kill the mold.
- Dead mold is still allergenic, and some dead molds are potentially toxic.
Mold Remediation Planning
The MACK Group, LLC considers the following questions when planning the remediation of mold:
- Are there existing moisture problems in the building?
- Have building materials been wet more than 48 hours?
- Are there hidden sources of water or is the humidity too high (high enough to cause condensation)?
- Are building occupants reporting musty or moldy odors?
- Are building occupants reporting health problems?
- Are building materials or furnishings visibly damaged?
- Has maintenance been delayed or the maintenance plan been altered?
- Has the building been recently remodeled or has building use changed?
- Is consultation with medical or health professionals indicated?
Mold Remediation Means and Methods
A variety of mold cleanup methods are available for remediating damage to building materials and furnishings caused by moisture control problems and mold growth. This may include:
- Wet Vacuum
- Damp Wipe
- HEPA Vacuum
- Interior Demolition - Building materials and furnishings that are contaminated with mold growth and are not salvageable should be double-bagged using 6-mil polyethylene sheeting. These materials can then usually be discarded as ordinary construction waste. It is important to package mold-contaminated materials in sealed bags before removal from the containment area to minimize the dispersion of mold spores throughout the building. Large items that have heavy mold growth should be covered with polyethylene sheeting and sealed with duct tape before they are removed from the containment area.
The MACK Group, LLC selects remediation personnel who have the experience and training needed to implement the remediation plan and use Personal Protection Equipment and containment as appropriate.
Remediation and Cleanup Final Steps
The MACK Group, LLC makes sure the mold remediation is complete by:
- Making sure the water or moisture problem is completely fixed.
- Use of professional judgment to determine if the cleanup is sufficient. Visible mold, mold-damaged materials, and moldy odors will not be present.
- Via air sampling, the kinds and concentrations of mold and mold spores in the building should be similar to those found outside, once cleanup activities have been completed.
- We revisit the site(s) shortly after remediation to look for signs of water damage or mold growth.
- The clients personnel and tenants will be able to occupy or re-occupy the space without health complaints or physical symptoms.
Nationwide Mold Remediation Removal Contractor Services
We offer our remediation ;services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
For more info visit www.mackgrp.com
Asbestos and Asbestos Materials Facts and Information
- Asbestos is a family of naturally occurring minerals, found in serpentinite and other metamorphic rock.
- Because of its strength and resistance to heat, asbestos was used for insulation, heat resistant clothing, roofing and fire proofing. It was also used as an additive to ease the manufacture and application of ceiling and wall finishes, tape joint compounds, floor tiles and mastics.
- Since many building materials can contain asbestos, remodel and repair activity in residential and commercial structures which disturbs asbestos-containing materials may cause the release of asbestos fibers into the air. There is no known health threat if asbestos-containing materials are in generally good condition and are left undisturbed.
- Inhaling airborne asbestos fibers can increase the risk of developing certain lung diseases, including lung cancer, mesothelioma and asbestosis.
- In the United States there are many regulations protecting children, employees, tenants, workers and others from exposure to asbestos. These include AHERA (schools), OHSA (workers), ASHARA (public buildings) and NESHAPS (emissions).
Source: www.mackgrp.com
Industrial and Commercial Asbestos Abatement Service by The MACK Group, LLC
The MACK Group, LLC provides expert industrial and commercial asbestos abatement removal services throughout the United States. Asbestos removal services include:
- Asbestos siding removal
- Asbestos roof and roofing materials removal
- Asbestos tile and mastic removal
- Asbestos insulation removal
We are licensed, fully insured and are willing to travel throughout the country. For more information on our services go to www.mackgrp.com
Asbestos Terms and Acronyms by The MACK Group, LLC
For your information, The Mack Group, LLC has compiled the following glossary of asbestos abatement and removal terms and terminology to assist our clients.
AHERA - The Asbestos Hazard Emergency Response Act, passed by Congress in 1986
CERCLA - The Comprehensive Environmental Response Compensation and Liability Act which is alsoo known as the "Superfund."
EPA - The United States Environmental Protection Agency EHSD - Environmental Health and Safety Division, U.S. EPA
Friable Asbestos Material - Any material containing more than one percent asbestos, as determined using the method specified in Appendix A, subpart F 40 CFR part 763, section 1, Polarized Light Microscopy, that when dry, can be crumbled, pulverized, or reduced to powder by hand pressure. If the asbestos content is less than 10 percent as determined by a method other than point counting by polarized light microscopy (PLM), verify the asbestos by point counting using PLM.
Glovebag - A sealed compartment with attached inner gloves used for the handling of asbestos- containing materials.
NARS - National Asbestos Registry System Negative pressure enclosure - means any enclosure of an asbestos abatement project area where the air pressure outside the enclosure is greater than the air pressure inside the enclosure and the air inside the enclosure is changed at least four times an hour by exhausting it through a HEPA filter.
NESHAP - The National Emission Standard for Hazardous Air Pollutants found in Title 40 CFR Part 61 promulgated under Section 112 of the Clean Air Act. NIOSH - National Institute for
Occupational Safety and Health NVLAP - National Voluntary Laboratory Accreditation Program
OSHA - Occupational Safety & Health Administration
PLM - Polarized light microscopy, as defined in Appendix A, subpart F, 40 CFR part 763, section 1
RACM - Regulated Asbestos-Containing Material. RACM means (a) Friable asbestos material, (b) Category I nonfriable ACM that has become friable, (c) Category I nonfriable ACM that will be or has been subjected to sanding, grinding, cutting, or abrading, or (d) Category II nonfriable ACM that has a high probability of becoming or has become crumbled, pulverized, or reduced to powder by the forces expected to act on the material in the course of demolition or renovation operations regulated by the Asbestos NESHAP.
RCRA - Resource Conservation and Recovery Act
TSCA - Toxic Substances Control Act Visible Emissions - Any emissions, which are visually detectable without the aid of instruments, coming from RACM or asbestos- containing waste material, or from any asbestos milling, manufacturing, or fabricating operation.
OTHER TERMS
Asbestos Abatement Project - means any demolition, renovation, repair, construction or maintenance activity of any public or private facility that involves the repair, enclosure, encapsulation, removal, salvage, handling, or disposal of any asbestos-containing material (ACM) with the potential of releasing asbestos fibers from asbestos-containing material into the air.
Asbestos Abatement Worker - means any employee of a licensed asbestos contractor who engages in asbestos abatement, has completed a training program approved by the governing agency and has been issued a certificate by that agency.
Asbestos Abatement Site Supervisor - means any asbestos abatement worker employed by a licensed asbestos contractor who has been specifically trained as a supervisor in a training program approved by the governing agency and who has been issued a certificate by that agency.
Asbestos Survey and Management Services by The MACK Group, LLC
Asbestos Management and Asbestos Survey Services
The MACK Group, LLC is a profesional and licensed asbestos abatement, management and survey company. Our ACM management and asbestos survey services are provided across the United States. We conduct the initial investigation to determine extent, quantities and locations of asbestos containing materials to develop a comprehensive approach for asbestos abatement services. This may include:
- Develop budgetary estimates or firm proposals for your asbestos and demolition projects.
- Initial asbestos survey
- Asbestos sampling
- Development of asbestos health and safety and work plan
- Management of actual asbestos abatement, demolition and related services
- Tracking and compilation of all asbestos waste manifests
- Final report detailing and compiling abatement activities and documentation
Nationwide Services
The MACK Group, LLC. offers these services within the United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL).
SOURCE: www.mackgrp.com
Expert Concrete Surface Preparation Contractor Service by The MACK Group, LLC
The MACK Group, LLC are specialists in flooring removal and concrete surface preparation services. We provide these flooring removal contractor services using the latest ride-on flooring removal and shot blaster equipment. Flooring removal or preparation is completely performed using mechanical methods and no chemicals. Our trained employees and hi-tech equipment have the power to get the job done at a fraction of the time and expense associated with conventional methods.
We Can Remove:
- Carpet and Carpet Tile
- Linoleum and Floor Tile
- Epoxy, Elastomeric and Rubberized Coatings
- Asbestos Floor Tile
- Sports Floors / Gym Floors
- Hardwood Flooring
- Stone and Ceramic
And much more...
For more information visit www.mackgrp.com
Mold Remediation and Asbestos Abatement Contractor Services by The MACK Group, LLC
Mold Remediation Basics
- The purpose of mold remediation is to remove the mold to prevent human exposure and damage to building materials and furnishings.
- It is necessary to clean up mold contamination, not just to kill the mold.
- Dead mold is still allergenic, and some dead molds are potentially toxic.
Mold Remediation Planning
The MACK Group, LLC considers the following questions when planning the remediation of mold:
- Are there existing moisture problems in the building?
- Have building materials been wet more than 48 hours?
- Are there hidden sources of water or is the humidity too high (high enough to cause condensation)?
- Are building occupants reporting musty or moldy odors?
- Are building occupants reporting health problems?
- Are building materials or furnishings visibly damaged?
- Has maintenance been delayed or the maintenance plan been altered?
- Has the building been recently remodeled or has building use changed?
- Is consultation with medical or health professionals indicated?
Mold Remediation Means and Methods
A variety of mold cleanup methods are available for remediating damage to building materials and furnishings caused by moisture control problems and mold growth. This may include:
- Wet Vacuum
- Damp Wipe
- HEPA Vacuum
- Interior Demolition - Building materials and furnishings that are contaminated with mold growth and are not salvageable should be double-bagged using 6-mil polyethylene sheeting. These materials can then usually be discarded as ordinary construction waste. It is important to package mold-contaminated materials in sealed bags before removal from the containment area to minimize the dispersion of mold spores throughout the building. Large items that have heavy mold growth should be covered with polyethylene sheeting and sealed with duct tape before they are removed from the containment area.
The MACK Group, LLC selects remediation personnel who have the experience and training needed to implement the remediation plan and use Personal Protection Equipment and containment as appropriate.
Remediation and Cleanup Final Steps
The MACK Group, LLC makes sure the mold remediation is complete by:
- Making sure the water or moisture problem is completely fixed.
- Use of professional judgment to determine if the cleanup is sufficient. Visible mold, mold-damaged materials, and moldy odors will not be present.
- Via air sampling, the kinds and concentrations of mold and mold spores in the building should be similar to those found outside, once cleanup activities have been completed.
- We revisit the site(s) shortly after remediation to look for signs of water damage or mold growth.
- The clients personnel and tenants will be able to occupy or re-occupy the space without health complaints or physical symptoms.
Nationwide Mold Remediation Removal Contractor Services
We offer our remediation ;services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
SOURCE www.mackgrp.com
The Mack Group, LLC Offers Flooring Removal and Concrete Surface Preparation Services
The MACK Group, LLC are specialists in flooring removal and concrete surface preparation services. We provide these flooring removal contractor services using the latest ride-on flooring removal and shot blaster equipment. Flooring removal or preparation is completely performed using mechanical methods and no chemicals. Our trained employees and hi-tech equipment have the power to get the job done at a fraction of the time and expense associated with conventional methods.
We Can Remove:
- Carpet and Carpet Tile
- Linoleum and Floor Tile
- Epoxy, Elastomeric and Rubberized Coatings
- Asbestos Floor Tile
- Sports Floors / Gym Floors
- Hardwood Flooring
- Stone and Ceramic
And much more...
For more information visit www.mackgrp.com
Surface Preparation Contractor Services by The MACK Group, LLC
The Mack Group, LLC provides nationwide surface preparation contractor services for industrial or commercial clientele.
We are an expert in flooring removal, abrasive blasting, shot blasting and waterblasting. We have the ability to remove:
- Carpet and Carpet Tile
- Linoleum and Floor Tile
- Epoxy, Elastomeric and Rubberized Coatings
- Asbestos Floor Tile
- Sports Floors / Gym Floors
- Hardwood Flooring
- Stone and Ceramic and much more...
Types of Surface Preparation Methods include:
- Shot Blasting
- Blastrac Floor Preparation
- Asbestos Floor Tile and Mastic Removal
- Abrasive Blast Cleaning
- Terminator Flooring Removal and Floor Preparation
- Chemical Stripping
We provide these surface preparation contractor services on a NATIONWIDE basis including New Jersey (NJ), Pennsylvania (PA), New York (NY), Delaware (DE), Massachussets (MA) and more.. For more information visit www.mackgrp.com
SOURCE www.mackgrp.com
Surface Preparation Contractor Services by The MACK Group, LLC
The Mack Group, LLC provides nationwide surface preparation contractor services for industrial or commercial clientele.
We are an expert in flooring removal, abrasive blasting, shot blasting and waterblasting. We have the ability to remove:
- Carpet and Carpet Tile
- Linoleum and Floor Tile
- Epoxy, Elastomeric and Rubberized Coatings
- Asbestos Floor Tile
- Sports Floors / Gym Floors
- Hardwood Flooring
- Stone and Ceramic and much more...
Types of Surface Preparation Methods include:
- Shot Blasting
- Blastrac Floor Preparation
- Asbestos Floor Tile and Mastic Removal
- Abrasive Blast Cleaning
- Terminator Flooring Removal and Floor Preparation
- Chemical Stripping
We provide these surface preparation contractor services on a NATIONWIDE basis including New Jersey (NJ), Pennsylvania (PA), New York (NY), Delaware (DE), Massachussets (MA) and more.. For more information visit www.mackgrp.com
SOURCE www.mackgrp.com
Interior Demolition and Decontamination Project Completed by The MACK Group, LLC
The MACK Group, LLC Completes Interior Demolition and Decontamination Project
The MACK Group, LLC, a premier asbestos abatement, decontamination and flooring removal contractor recently completed the decontamination, demolition and removal of 2 dryers from an active Fortune 500 pharmaceutical facility.
The Mack Group, LLC utilized a crew of five trained and safety conscientious technicians to first setup a dust barrier system. The dust barrier system, which consisted on polyethylene sheeting and negative air machines and ductwork, was necessary to prevent the migration of contaminated dusts from the work area into the active clean areas of the facility.
Once the dust controls were in place, decontamination of the dryer units was commenced. The chemical powders and dusts that were still in and on the units were vacuumed from the units and properly containerized. The containers of collected chemical materials were then handed over to the client for proper disposal and recycling.
Once the equipment was decontaminated, both units were then demolished and removed from the facility. Due to door way and access routes the equipment had to be processed into small pieces to facilitate removal from the facility. The demolished equipment pieces were then sent offsite for scrap metal recycling.
& nbsp; &n bsp; &nb sp;
The project was completed in approximately one week without incident or injury.
About The MACK Group, LLC
The Mack Group, LLC is one of the premier contractors in the United States offering nationwide services including asbestos abatement, asbestos removal, flooring removal, shot-blasting, mold remediation, interior demolition, lead abatement, duct cleaning, biological/chemical remediation and more.
Contact Information:
The MACK Group, LLC
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 973-759-5000
Fax: 973-759-5554
Web: www.MACKgrp.com
For more information contact:
Stephen King (973) 759-5000 ext. 302
SOURCE: www.mackgrp.com
SKing@mackgrp.com
Mold Remediation and Asbestos Abatement Contractor Services
THE MACK GROUP, LLC Provides nationwide mold remediation and asbestos abartement services
Mold Remediation Basics
- The purpose of mold remediation is to remove the mold to prevent human exposure and damage to building materials and furnishings.
- It is necessary to clean up mold contamination, not just to kill the mold.
- Dead mold is still allergenic, and some dead molds are potentially toxic.
Mold Remediation Planning
The MACK Group, LLC considers the following questions when planning the remediation of mold:
- Are there existing moisture problems in the building?
- Have building materials been wet more than 48 hours?
- Are there hidden sources of water or is the humidity too high (high enough to cause condensation)?
- Are building occupants reporting musty or moldy odors?
- Are building occupants reporting health problems?
- Are building materials or furnishings visibly damaged?
- Has maintenance been delayed or the maintenance plan been altered?
- Has the building been recently remodeled or has building use changed?
- Is consultation with medical or health professionals indicated?
Mold Remediation Means and Methods
A variety of mold cleanup methods are available for remediating damage to building materials and furnishings caused by moisture control problems and mold growth. This may include:
- Wet Vacuum
- Damp Wipe
- HEPA Vacuum
- Interior Demolition - Building materials and furnishings that are contaminated with mold growth and are not salvageable should be double-bagged using 6-mil polyethylene sheeting. These materials can then usually be discarded as ordinary construction waste. It is important to package mold-contaminated materials in sealed bags before removal from the containment area to minimize the dispersion of mold spores throughout the building. Large items that have heavy mold growth should be covered with polyethylene sheeting and sealed with duct tape before they are removed from the containment area.
The MACK Group, LLC selects remediation personnel who have the experience and training needed to implement the remediation plan and use Personal Protection Equipment and containment as appropriate.
Remediation and Cleanup Final Steps
The MACK Group, LLC makes sure the mold remediation is complete by:
- Making sure the water or moisture problem is completely fixed.
- Use of professional judgment to determine if the cleanup is sufficient. Visible mold, mold-damaged materials, and moldy odors will not be present.
- Via air sampling, the kinds and concentrations of mold and mold spores in the building should be similar to those found outside, once cleanup activities have been completed.
- We revisit the site(s) shortly after remediation to look for signs of water damage or mold growth.
- The clients personnel and tenants will be able to occupy or re-occupy the space without health complaints or physical symptoms.
Nationwide Mold Remediation Removal Contractor Services
We offer our remediation ;services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
VISIT US at WWW.MACKGRP.COM
Flooring Removal Contractor Services - Floor Removal Experts
The MACK Group, LLC are specialists in flooring removal and concrete surface preparation services. We provide these flooring removal contractor services using the latest ride-on flooring removal and shot blaster equipment. Flooring removal or preparation is completely performed using mechanical methods and no chemicals. Our trained employees and hi-tech equipment have the power to get the job done at a fraction of the time and expense associated with conventional methods.
We Can Remove:
- Carpet and Carpet Tile
- Linoleum and Floor Tile
- Epoxy, Elastomeric and Rubberized Coatings
- Asbestos Floor Tile
- Sports Floors / Gym Floors
- Hardwood Flooring
- Stone and Ceramic
- And much more...
We have the ability to perform small projects but specialize in large commercial and industrial floor removal or surface preparation projects. Visit our website for more information
SOURCE: www.mackgrp.com
Asbestos Abatement and Asbestos Removal Contractor Services
The MACK Group, LLC offers a complete solution to your asbestos abatement, removal and disposal needs.
Asbestos Management and Asbestos Survey Services - Conduct initial investigation to determine extent, quantities and locations of asbestos containing materials to develop a comprehensive approach for asbestos abatement services. This may include:
Develop budgetary estimates or firm proposals for your asbestos and demolition projects.
Initial asbestos survey
Asbestos sampling
Development of asbestos health and safety and work plan
Management of actual asbestos abatement, demolition and related services
Tracking and compilation of all asbestos waste manifests
Final report detailing and compiling abatement activities and documentation
Asbestos Abatement and Removal Services - Asbestos abatement removal services include:
Abatement of Asbestos Containing Materials (ACM)
Transite removal
Asbestos roof removal
Asbestos tile removal
Asbestos siding removal
Asbestos insulation removal
Asbestos containing material transportation and disposal
Asbestos Encapsulation - An alternative to asbestos removal is encapsulation. Asbestos containing material encapsulation basically consists of laminating or covering over the surface of the ACM with new materials or painted coatings.
We perform all of the above services typically for industrial (manufacturing, pharmaceutical, chemical, etc.) and commercial (office building, warehouse, etc.) clients.
Nationwide Asbetsos Removal Contractor Services
The MACK Group, LLC offers these abatement services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
The MACK Group, LLC celebrates 6th Year in Business
April 2008 – The MACK Group, LLC, a premier asbestos abatement, demolition, mold, lead, hazardous waste and flooring removal/shot-blast contractor recently celebrated their 6th year in business.
Steve King and Mike Cooper started The MACK Group, LLC in 2002 after honing their technical and business skills at several large asbestos abatement firms. Mr. King’s and Mr. Cooper’s corporate mission is to provide clients with efficient, safe and effective services that meet all local, state and federal rules and regulations at a cost effective competitive price while providing quality service.
Over the years, The MACK Group, LLC continued to grow doing larger projects and building up their reputation in the industry. They now have several offices and warehouses and can handle projects across the country.
An example of the type and magnitude of project The MACK Group, LLC can perform is the large asbestos abatement removal project at the former GAF Plant located in South Bound Brook, New Jersey. The asbestos removal project consisted of asbestos abatement of 300,000 sf of asbestos transite roof and siding panels, 100,000 sf of asbestos built-up roofing, 11,000 ft of asbestos piping, 15,000 sf of asbestos tile and mastic, three 5 story high industrial asbestos boilers and the removal of several hundred tons of asbestos contaminated soil. The project was completed without issue, on schedule and the client was extremely pleased with the professional work accomplished.
The MACK Group, LLC is an established leader in the asbestos and decontamination industries and looks forward to the serving our clientele for many years to come.
About Us
The MACK Group, LLC provides nationwide asbestos abatement, asbestos removal and demolition contractor services. Contractor services include asbestos abatement, asbestos removal, transite removal, asbestos roof removal, demolition, Terminator flooring removals, floor removal contractor services, Shot Blast/Blastrac services and fluorescent bulb and ballast recycling services.
Contact Information
The MACK Group, LLC
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 973-759-5000
Fax: 973-759-5554
Web: www.MACKgrp.com
For more information contact:
Stephen King (973) 759-5000 ext. 302 or via email sking@mackgrp.com
The MACK Group, LLC Completes Asbestos Mastic Flooring Removal Project
The MACK Group, LLC, a premier asbestos abatement and flooring removal contractor, recently completed a project that consisted of the abatement of asbestos mastic on a concrete floor. The project was performed for a national environmental general contractor at a large private college in Connecticut.
The MACK Group, LLC (MACK) was contracted to abate asbestos mastic that was adhered to a concrete floor without damaging concrete. The estimated quantity of asbestos containing mastic that needed to be abated was approximately 30,000 square feet.
To remove the asbestos mastic, MACK used a combination of proprietary flooring removal machines that they own in their fleet of abatement equipment. These machines allowed MACK to easily remove the mastic down to the original concrete floor surface without damaging the existing concrete.
& nbsp; &n bsp; &nb sp;
The project was completed without incident or injury in 3 days.
About The MACK Group, LLC
The Mack Group, LLC is one of the premier contractors in the United States offering nationwide services including asbestos abatement, asbestos removal, flooring removal, shot-blasting, mold remediation, demolition, decontamination, lead abatement, duct cleaning, biological/chemical remediation and more.
Contact Information:
The MACK Group, LLC
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 973-759-5000
Fax: 973-759-5554
Web: www.mackgrp.com
For more information contact:
Stephen King (973) 759-5000
sking@mackgrp.com
Asbestos Removal and Asbestos Abatement Contractor Services - Nationwide
The MACK Group, LLC provides nationwide asbestos removal and asbestos abatement services.
The MACK Group, LLC offers a complete solution to your asbestos abatement, removal and disposal needs.
Asbestos Management and Asbestos Survey Services
Conduct initial investigation to determine extent, quantities and locations of asbestos containing materials to develop a comprehensive approach for asbestos abatement services. This may include:
- Develop budgetary estimates or firm proposals for your asbestos and demolition projects.
- Initial asbestos survey
- Asbestos sampling
- Development of asbestos health and safety and work plan
- Management of actual asbestos abatement, demolition and related services
- Tracking and compilation of all asbestos waste manifests
- Final report detailing and compiling abatement activities and documentation
Asbestos Abatement and Removal Services
Asbestos abatement removal services include:
- Abatement of Asbestos Containing Materials (ACM)
- Transite removal
- Asbestos roof removal
- Asbestos tile removal
- Asbestos siding removal
- Asbestos insulation removal
- Asbestos containing material transportation and disposal
Asbestos Encapsulation
An alternative to asbestos removal is encapsulation. Asbestos containing material encapsulation basically consists of laminating or covering over the surface of the ACM with new materials or painted coatings.
We perform all of the above services typically for industrial (manufacturing, pharmaceutical, chemical, etc.) and commercial (office building, warehouse, etc.) clients.
Nationwide Asbetsos Removal Contractor Services
The MACK Group, LLC offers these abatement services within the Continental United States with particular emphasis in New Jersey (NJ), New york (NY), Pennsylvania (PA), Ohio (OH), Delaware (DE), Maryland (MD), Massachusetts (MA), Connecticut (CT), West Virginia (WV), Indiana (IN) and Illinois (IL)
Source: The MACK Group, LLC Website
The MACK Group, LLC Completes Large Asbestos Removal Project
The MACK Group, LLC completed a large asbestos abatement removal project at the former GAF Plant located in South Bound Brook, New Jersey.
The asbestos removal project consisted of asbestos abatement of 300,000 sf of asbestos transite roof & siding panels, 100,000 sf of asbestos built-up roofing, 11,000 ft of asbestos piping, 15,000 sf of asbestos tile & mastic, three 5 story high industrial asbestos boilers and the removal of several hundred tons of asbestos contaminated soil.
Prior to asbestos abatement activities, a 10 day notification was submitted which is a written notification of intention to demolish in accordance with 40 CFR 61.145 to 61.155 and N.J.A.C. 7:26-2.12(d) and (e). Proper asbestos wetting, removal and handling techniques were employed to safely remove the materials. The Mack Group, LLC used various techniques to remove the asbestos materials including wetting of all friable ACM and bagging the ACM using poly-wrapping. Also utilized was the wetting and direct placement in lined (at least 6 mil thick liner) and sealed bulk containers. The transportation of asbestos and ACM was in accordance with N.J.A.C. 7:26-3.5(d) and by registered New Jersey solid waste vehicles. ACM was then properly disposed at a licensed landfill.
Because the former plant had been vacant for a long period of time all utilities were disconnected. The MACK Group, LLC. utilized there large onsite generators to supply all power for the 60 HEPA negative air filtration units used inside work area containments. The MACK Group, LLC. also utilized a Terminator floor scraping machine, bobcats, aerial lifts, chutes and twenty of there NJ licensed asbestos workers to bring in the project in ahead of schedule and without injury.
Following asbestos abatement activities, the buildings were then demolished.
For Project Pictures go to Asbestos Project Pictures
About Us
The MACK Group, LLC provides nationwide asbestos abatement, asbestos removal and demolition contractor services. Contractor services include asbestos abatement, asbestos removal, transite removal, asbestos roof removal, demolition, Terminator flooring removals, floor removal contractor services, Shot Blast/Blastrac services and fluorescent bulb and ballast recycling services.
The MACK Group
1500 Kings Hwy. N., Ste 209
Cherry Hill, NJ 08034
Tel: 973-759-5000
Fax: 973-759-5554
Web: www.mackgrp.com
For more information contact:
Stephen King (973) 759-5000 ext. 302
SKing@mackgrp.com